Account
Quote
Cart
FREE Standard Shipping
Free shipping is valid on any order shipped to a single address in the mainland USA. Standard shipping is covered. Overnight or 2-day delivery will cost extra and is not available on custom-made products.
Free shipping is valid on any order shipped to a single address in the mainland USA. Standard shipping is covered. Overnight or 2-day delivery will cost extra and is not available on custom-made products.
Heat Wave Pro™ Thermal Insulation
Further increase the comfort of your vehicle with sound and thermal insulation. Heat Wave Pro™ is a high R-value, lightweight sound absorber and decoupler. This thermal acoustic barrier contains a treated jute material surrounded by two layers of reinforced foil fabric. It’s durable; it reflects radiant heat; and it insulates against both heat and noise transfer. Heat Wave Pro™ makes an excellent automotive floor insulation, car hood liner, or fits in anywhere else your factory insulation isn't doing the job.
Features
Thermal acoustic jute sandwiched between two sheets of reinforced foil
R-value per inch roughly 50% better than your average home insulation
Eco-friendly jute material is treated for fire, mold, and mildew resistance
Each sheet is 3/8” thick
Two size options: 3' x 4' (12 Sq Ft) and 6’ x 4’ (24 Sq Ft)
Temperature rated up to 250 °F
Made in the USA
Specs
| Dimensions | 3' x 4' (12 sq ft), 6' x 4' (24 sq ft) |
| Thickness | 3/8" |
| Weight | 2.5 lbs (3' x 4' sheet), 5 lbs (6' x 4' sheet) |
| Temperature Rating | 250 °F |
| Thermal Insulation (R-value) | 3.91 per inch |
| Adhesive Options |
Contact Spray Adhesive (1 can per 36 sq ft) |
Resources
| Spec Sheet | Heat Wave Pro Product Sheet |
| Install Guide | Heat Wave Pro Automotive Install Guide |
Material Testing
Noise Reduction Coefficient
| Frequency (Hz) | 125 | 250 | 500 | 1000 | 2000 | 4000 | NRC |
| 3/8" Jute | .12 | .10 | .23 | .56 | .81 | .89 | .45 |
|
Description |
Testing Method |
Performance |
|
Surface Burning Characteristics (Fire Hazard Classification) |
ASTM E 84 UL 723 |
Flame Spread (Class 1): 10 Smoke Developed (Class 1): 20 |
|
Zero Burn Surface |
FMVSS 302 |
Exceeds Standard (Less than 1/5 in./min) |
|
Facing |
|
99% Pure Aluminum Reinforced Foil |
|
Foil Emissivity |
ASTM E 40 |
.03 |
|
Foil Reflectivity |
ASTM E 40 |
97% |
|
Tensile Tear Strength |
|
100 lbs |
|
Pad Weight |
|
3 oz./s.f. |
Product Usage Tips
Cuts with scissors
Apply using our Contact Spray Adhesive (1 can per sheet) or Super Strong Double Sided Tape
We recommend applying on top of your sound deadener and below your noise barrier. It also is an excellent thermal insulator to use above your roof’s headliner or under the hood. You can even use it as engine compartment insulation material on your boat or RV. Learn more about foil insulation R-Value to see why.
Keep at least 2" of clearance from the heat source. We recommend taping up edges with Foil insulation Tape
Cost-effective aftermarket insulation you can use as van or RV roof insulation
Common Product Uses
Doors - outer and inner door skin
Floor - front firewall all the way back to the rear deck seat wall
Firewall - cabin or engine side
Trunk - floor, walls, lid, and spare tire area
Roof - replace or install above the headliner
Hood - under hood
RV & Motorhome Installs
Engine covers / Dog Houses
Generator compartments
Ceilings / Walls / Floors
Firewalls
Boat Installs
Engine covers / Dog Houses
Inside hull
Generator compartments
Pump housing
Bulkheads & overhead
Heat Wave Pro is a flexible thermal insulator and heat reflector that can be used for everything from a semi truck's walls to HVAC ductwork to insulating the inside of an RV/motorhome. Call us if you have questions about a potential use case.
