Account
Quote
Cart
Customer Builds: Mitsubishi Sound Deadening Projects
Customer Builds: Mitsubishi Sound Deadening Projects
FEATURE BUILDS
2015 mitsubishi lancer evo by bruce w
Mitsubishi Lancer Evolution's are a model of Mitsubishi that we get a lot of calls to quiet down. From the loud exhaust to the low stance, this car's design is a breeding ground for structure borne noise. Fortunately, Second Skin has the cure to the EVO's noise issues - Damplifier Pro and Luxury Liner Pro.
Treating the trunk floor, below the back seat, and the full floor area is the key to victory with the Mitsubishi Evo. Adding at least 60% coverage of the Damplifier Pro and as close to 100% coverage of Luxury Liner Pro will reduce those dB's by deadening vibrations and blocking out the airborne sound waves of road and engine noise.
The results can look like what installer Bruce W achieved in his client's 2015 Mitsubishi Lancer Evolution. All the way from 77.8 dB to 66.9 dB (tests at 65 mph). That's over 50% of the perceived noise...gone!
The EVO sure does look pretty from the outside. Let's see what it takes to get it quiet on the inside.
The first step is to get it cleaned out and wiped down with denatured alcohol to make a nice canvas for the Damplifier Pro.
After a solid layer of Damplifier Pro, follow up with 100% coverage of Luxury Liner Pro.
Bruce always does awesome work. Hard not to be satisfied when you get an 11 dB dropin the cabin
Full testing results on this 2015 Mitsubishi Lancer Evolution.
2014 mitsuishi lancer evolution
Damplifier Pro sound deadening and Luxury Liner Pro sound blocking materials are important for proper sound reduction in the EVO. Here's a couple more pics that give you an idea of what your project could look like:
- EVO #2: This EVO owner used Damplifier Pro and Luxury Liner Pro on the floor, doors, and trunk.
- EVO #3: This EVO owner applied Damplifier Pro to the rear seat, seat wall, and trunk.
Complete coverage of the floor, front-to-back with Damplifier Pro and Luxury Liner Pro.
Next up, this customer did full coverage on the outer and inner skins of the door with Damplifier Pro. They they applied a full layer of Luxury Liner Pro on the inner door skin to block out road noise.
This customer used Luxury Liner Pro only. They applied it to the rear seat deck, the rear seat wall, and the trunk floor to stop the exhaust noise from coming through. This is the minimum required treatment to block out exhaust in the EVO.
View of the 2013 EVO from the trunk looking in.
From the customer: "The car became painfully loud to drive at high boost and only 5 speed. Used MLV to cover the entire area behind the back seat into the trunk and a single sheet to cover the entire rear deck below rear windshield. I was REALLY impressed with it. A buddy got in and stopped mid convo on the freeway and said 'Wait, this is way more quiet than it used to be'" #SecondSkinForTheWin
MORE BUILDS...
2008 LANCER EVOLUTION X
Type of Project:
Floor, Ceiling, Trunk, Hood & Doors
Products Used:
92 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Ceiling/Trunk/Hood)
58 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Trunk)
20 Sq Ft of Mega Zorbe Hydrophobic Melamine Foam (Ceiling)
18 Sq Ft of Mega Block Melamine Foam (Hood)
Accessories:
Spray Adhesive (2 cans), Wooden Roller, Foil Tape, Speaker Tweakers (Set of 4)
Learn more about the products in this build:
Damplifier Pro
Luxury Liner Pro
Mega Zorbe
Mega Block
2002 LANCER
Type of Project:
Floor & Doors
Products Used:
65 Sq Ft of Damplifier Pro Deadener (Floor/Doors)
36 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor)
28 Sq Ft of OverKill Pro Closed Cell Foam (Doors)
Accessories:
Spray Adhesive (2 cans), Wooden Hand Roller
Learn more about the products in this build:
Damplifier Pro
Luxury Liner Pro
OverKill Pro
2010 ECLIPSE
Type of Project:
Floor, Doors, & Trunk
Products Used:
66 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Trunk)
48 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl(Floor/Trunk)
16 Sq Ft of OverKill Closed Cell Foam (Inner Door Panel)
14 Sq Ft of OverKill Pro Closed Cell Foam (Doors)
Accessories:
Spray Adhesive (2 cans), Wooden Roller
Learn more about the products in this build:
Damplifier Pro
Luxury Liner Pro
OverKill
OverKill Pro
1998 ECLIPSE SPYDER GS
Type of Project:
Sound Deadening Spray on the Vehicle's Full Inside & Outside
Products Used:
140 Sq Ft of Spectrum (Undercarriage / Wheel Wells / Floor / Trunk / Doors)
Accessories:
Spray Gun Kit (6 Gallons)
2019 ECLIPSE CROSS SP
Type of Project:
SUV Sound Deadening Package
Products Used:
120 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Cargo Area/Ceiling)
72 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor/Doors/Cargo Area)
24 Sq Ft of OverKill Closed Cell Foam (Inner Door Panel)
28 Sq Ft of Heat Wave Pro Jute Automotive Heat Insulation (Ceiling)
Accessories:
Spray Adhesive (4 cans), Wooden Roller, Foil Tape, Fury Knife
Learn more about the products in this build:
Damplifier Pro
Luxury Liner Pro
OverKill
Heat Wave Pro
2006 MIRAGE
Type of Project:
Premium Audio Door Kit
Products Used:
36 Sq Ft of Damplifier Pro Deadener (Doors/Back Hatch)
36 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Doors/Back Hatch)
Accessories:
Spray Adhesive, Wooden Roller, Speaker Tweakers
2015 OUTLANDER
Type of Project:
Floor, Doors, & Cargo Area Soundproofing
Products Used:
100 Sq Ft of Spectrum Liquid Deadener (Floor/Doors/Cargo Area)
64 Sq Ft of Luxury Liner Pro Mass Loaded Vinyl (Floor)
24 Sq Ft of Mega Zorbe Melamine Foam (Outer Door Skins)
Accessories:
Spray Gun, Bottle, Plastiwrap, Spray Adhesive (2 cans)
Learn more about the products in this build:
Spectrum
Luxury Liner Pro
Mega Zorbe
2016 RVR
Type of Project:
Floor, Doors, & Cargo Area
Products Used:
80 Sq Ft of Damplifier Pro Deadener (Floor/Doors/Cargo Area)
54 Sq Ft of Luxury Liner Pro Sound Barrier Material (Floor)
20 Sq Ft of OverKill Closed Cell Foam (Inner Door Skins)
24 Sq Ft of OverKill Pro Closed Cell Foam (Doors)
Accessories:
Spray Adhesive (3 cans), Wooden Roller, Speaker Tweakers
Learn more about the products in this build:
Damplifier Pro
Luxury Liner Pro
OverKill
OverKill Pro