Noise Reduction Uses...

Luxury Liner is the final layer of material in a multi step approach.
First, products like Damplifier Pro and Spectrum absorb structure borne noise. Next, a layer of Overkill or Overkill Pro is applied to filter our very specific airborne frequencies.

Luxury Liner is designed to go on top of Dampers and absorbers to block the passage of the most difficult airborne sound waves. When used with out other products Luxury Liner can help make any car quiet as a brand new luxury vehicle.

Mobile Audio

The quieter your car is the louder your stereo system will appear to be.

Because Luxury Liner does such a good job at killing road noise, engine noise and exhaust drone, the stereo has less sonic territory to fight for. With less unwanted noise the vehicle, the music has nothing to compete with so it sounds louder to the listener.

Thermal Insulation

Luxury Liner is the second best thermal insulation mat we sell. Adding a layer of Luxury Liner on top of Damplifier Pro is by far, one of the best ways you can treat noise and heat at the same time.

For the ultimate in themal insulation, use a combination of Damplifier Pro followed by Luxury Liner Pro in side the car, with a coating of Firewall on the underbody

FAQ

Which side of Luxury Liner does the adhesive get applied to?
The Second Skin Contact Adhesive should always go on the foam side of Luxury Liner. The foam side should then get applied on top of the foil side of Damplifier or Damplifier Pro. The vinyl side of Luxury Liner will always face the passengers in the car.

What is the difference between Luxury Liner and Luxury Liner Pro?
Luxury Liner and Luxury Liner Pro share the same heavy vinyl barrier, but regular Luxury Liner is bonded to an open celled foam, while Luxury Liner Pro is bonded to a water resistant closed cell foam. It is because of this heavy duty closed cell foam that Luxury Liner is the better option for reducing unwanted noise and heat.

What is the difference between Luxury Liner and Overkill Pro?
Luxury Liner is a noise barrier. Overkill Pro is a noise absorbing foam filter.
Both products get applied on top of vibration dampers like Damplifier Pro or Spectrum in order to reduce airborne sound waves, but they do it in two totally different ways.

Overkill filters out specific frequencies that are able to penetrate the first vibration damping layer, but because it is so light, it allows many other sound wave frequencies to pass right through.

Luxury Liner is a barrier that blocks and reflects the most difficult airborne sound waves that Overkill Pro is not capable of handling.

Specification

Sheet size =  24" x 54" (9 sq. feet)
Thickness =  between 1/4" -3/8" (.250" .375")
Mass/Area = 1.1 lbs. per sq foot
Total weight per sheet = 9.9 lbs. per sheet